dreamchaser69
Magic Maker
Posting for a neighbor - part of her late husbands collection = MAKE AN OFFER! Please read the whole post.
Limited production of about 500-750 units for this particular model (not to be confused with the INTERARMS and S&W PPK/s models)
Collectors desired this because of the limited production between Walther Germany and Interarms when Interarms lost the contract.
Finished by RANGER and distributed by S&W under license with Walther under the "Walther USA, LLC" company
The gun was made from left over parts that were available here in the U.S. and Germany. Assembled in Gadsden, Al. by Ranger manufacturing, which interestingly is the same company that assembled them for Interarms.
AAA in Serial # designates the limited production
"VA" Proof Stamped Barrel also shows limited production
Original Box
3 OEM magazines
Cleaning rod
She said he only shot this a few times at the range - maybe a "box"
Value ranges on these from $700 to as much as $1,400 depending on condition ($1,400 being NIB and low SN)
This one is a 9.0 out of 10
Minor nicks at the ejector (from the ejector removal tool)
Valued at $1,100 in current condition.
Asking $750 or Best Offer! Please understand that this is what she was "informed of worth" by a "collector" = not me..... so MAKE AN OFFER IF YOU LIKE IT~
Must be picked up in Gulf Breeze (98 and Avalon area)(Tiger Point) or may meet at I-10 and Avalon (time depending to miss traffic)
Must have a CWP/CCW and complete a BOS
PM with any questions or offers.
NOTE: I had sold this to a forum member - however, being "new", the slide was to hard for him to pull back. I bought a 17# spring (factory is 20#) and that was much better but he still didn't have enough hand strength ~ so ~ I un-did the deal with him. It was the right thing to do....... It will come with both the 17 and 20 pound springs
Limited production of about 500-750 units for this particular model (not to be confused with the INTERARMS and S&W PPK/s models)
Collectors desired this because of the limited production between Walther Germany and Interarms when Interarms lost the contract.
Finished by RANGER and distributed by S&W under license with Walther under the "Walther USA, LLC" company
The gun was made from left over parts that were available here in the U.S. and Germany. Assembled in Gadsden, Al. by Ranger manufacturing, which interestingly is the same company that assembled them for Interarms.
AAA in Serial # designates the limited production
"VA" Proof Stamped Barrel also shows limited production
Original Box
3 OEM magazines
Cleaning rod
She said he only shot this a few times at the range - maybe a "box"
Value ranges on these from $700 to as much as $1,400 depending on condition ($1,400 being NIB and low SN)
This one is a 9.0 out of 10
Minor nicks at the ejector (from the ejector removal tool)
Valued at $1,100 in current condition.
Asking $750 or Best Offer! Please understand that this is what she was "informed of worth" by a "collector" = not me..... so MAKE AN OFFER IF YOU LIKE IT~
Must be picked up in Gulf Breeze (98 and Avalon area)(Tiger Point) or may meet at I-10 and Avalon (time depending to miss traffic)
Must have a CWP/CCW and complete a BOS
PM with any questions or offers.
NOTE: I had sold this to a forum member - however, being "new", the slide was to hard for him to pull back. I bought a 17# spring (factory is 20#) and that was much better but he still didn't have enough hand strength ~ so ~ I un-did the deal with him. It was the right thing to do....... It will come with both the 17 and 20 pound springs
Attachments
-
20210309_174229.jpg2.6 MB · Views: 205
-
20210309_174254.jpg2.9 MB · Views: 211
-
20210309_174429.jpg5.5 MB · Views: 199
-
20210309_174501.jpg855.7 KB · Views: 181
-
20210309_174527.jpg2 MB · Views: 178
-
20210309_174613.jpg1.7 MB · Views: 176
-
20210309_174802.jpg2.3 MB · Views: 169
-
20210309_174822.jpg4 MB · Views: 166
Last edited: