The New Classified Ad System is live. Please head here for details: https://gulfcoastgunforum.com/threads/new-classified-ad-system-tutorial.112735/
let us know how this turns out !!!show the picture of said screw head but allen strip trick is to first [if any ] put good screws back in to relieve pressure on plate . Next is to take a torx bit [ a very good one] that is just a little too big to fit in the stripped allen screw . Support your work underneath well and hammer the torx bit into the hole and turn out ...
Had a stuck and/or damaged front action screw on a Savage once. Found a right-size drill bit (i.e., just larger than the shank of the screw) to drill into the head just enough for it to pop off, then was able to remove the threaded section once the stock was removed.show the picture of said screw head but allen strip trick is to first [if any ] put good screws back in to relieve pressure on plate . Next is to take a torx bit [ a very good one] that is just a little too big to fit in the stripped allen screw . Support your work underneath well and hammer the torx bit into the hole and turn out ...