Suggestions on drop in trigger?

[Rebel_Rider1969]

Under $100 or less. Gotta do something, crap go triggers have to go. If a member has one let me know. Thanks.

 

[nitro]

Rock river two stage trigger.

 

[nitro]

About 90.00.

 

[JWlineman]

You might want to post an ad in the WTB section. As far as $100 drop in triggers, CMC and Rise triggers come to mind. If you don't mind setting your own springs, LaRue 2 stage and the Geissele ACT is good too for around a hundo.

Sent from my SM-N950U using Tapatalk

 

[Cstokes91]

I'm a very big fan of LaRue triggers.

https://www.larue.com/category/parts-accessories/lower-parts/triggers/

 

[stage20]

Single or 2 stage?
I've been looking at this one
The rise triggers are decent too. 80 dollar range shipped is usually the sale price on the base model rise.

https://botach.com/ica-match-grade-...lat-skeletonize-black-oxide/?sscid=71k3_fnxpp

 

[Rebel_Rider1969]

Thanks, any trigger would probably be a great improvement. Probably get one of the rise triggers, just have to figure out which one.

 

[stage20]

At under 100 bucks I think there is only one. Choose between curved or flat blade

 

[FrommerStop]

I put in a LaRue on one lower and so far it seems like a good trigger.

 

[Rebel_Rider1969]

This? $80.00

https://www.larue.com/products/larue-tactical-mbt-1s-trigger/

 

[Rebel_Rider1969]

Prob going to get the Rise ra-140 curved. $89 from AIM.

 

[FrommerStop]

This? $80.00

https://www.larue.com/products/larue-tactical-mbt-1s-trigger/

What I ordered some time ago was: LaRue Tactical MBT-2S Trigger and I paid a bit more. These triggers are not super light and I put in the heavy spring that adds two more pounds to the pull.
I may pick up a couple since they have a heavy spring option for use with my 7.62x39 uppers and look for something lighter for my other boxer primed chambered uppers.

 

[bowfreak]

Prob going to get the Rise ra-140 curved. $89 from AIM.

I am very happy with mine

 

[SAWMAN]

If this will be a hunter I suggest you put in a trigger/trigger pack of LESS than 3.6lbs.
Mine are all 3.5lbs or less.
I prefer 2 stage so I can "stage" the release. ---- SAWMAN

 

[Rebel_Rider1969]

aterial & Finish:*machined aluminum, hard coat anodized
Trigger Shoe/Disconnector/Hammer Material & Finish:*tool steel, finish not specified
Receiver Tensioning System:*set screws
Trigger Pull Weight:*~3.97 lbs as tested
Adjustable:*No. From the factory it’s set to*3.5 lbs
Trigger Shoe Travel To Break:*0.042″
Initial Take-Up Distance:*0.00″
Overtravel Distance:*0.047″
Travel to Reset:*0.0655″
MSRP

 

[Zeroed in]

If you've not seen/read this, you might ought to, very informative. https://www.gunmann.com/ar-15-triggers/

Then you have the DIY trigger jobs... https://www.arbuildjunkie.com/how-to-perform-ar-15-trigger-job/

 

[Ric-san]

Looks like a decent deal on a ALG trigger...

https://www.primaryarms.com/alg-defense-quality-milspec-trigger-qms

 

[TackleberryMCS]

I'm a very big fan of LaRue triggers.

https://www.larue.com/category/parts-accessories/lower-parts/triggers/

This is the way to go. You get the most bang for the buck and top quality to boot.

 

[TackleberryMCS]

Prob going to get the Rise ra-140 curved. $89 from AIM.

The Rise Armament RA-140 SST is a good trigger, but you would be better served with the LaRue Tactical MBT-2S (2-stage) or the MBT-1S (single stage). I had the RA-140 in a build, but changed it out for a MBT-2S and sold the RA-140. No regrets whatsoever. I have several of the MBT-2S triggers.

 

[Rebel_Rider1969]

Never had a two stage. Dont know anything about them.