Themumfordman
Master
What buffer system do you use with the 300? Super 42 says not to use with subsonics
This is my DIY “Honey Badger”
Build. Base is a SiCo lower, BCM upper with the HB 7.75” barrel/gas system and brace/buffer. Has my standard SSA-E trigger, Radian safety, and I used a Midwest Industries wide 10” rail, which slides about 2.5 inches over the base of the suppressor, giving a lot more room for gripping and adding accessories. Only downside is it does get a bit warm when you’re running a few mags through it.