The New Classified Ad System is live. Please head here for details: https://gulfcoastgunforum.com/threads/new-classified-ad-system-tutorial.112735/
I wondered about this, nobody had mentioned the feed ramp.The first thing I did to mine was the stainless feed ramp from MCarbo. I also polished internals while doing this. The plastic feed ramp had less than 100 rounds and showed a lot of wear.
Where did you order from? I tried a one from amazon and its a good idea. But the set screws it came with were too short. Had to find longer screwsOrdered 2 of these to try with trs25. Don't know if it will work but always need extra mounts. Will get used on something!
Its eats everything, brass, aluminum, and steelAny specific wt bullet that works better in it? 115, 124,147? Accuracy, cycling.
Feebay got 2 for 11.99. Probably the same one. It has set screws.Where did you order from? I tried a one from amazon and its a good idea. But the set screws it came with were too short. Had to find longer screws
I'll blast for a bit, if I like it. I'll get one.Oh and the stainless feed ramp is the way to go
With the longer screws it worked though? Looks like it's closer to 30 deg than 45. Will try it mounted left, as I shoot left. Should place the on/off at 12 posit. (Trs25) my favorite micro optic.Sounds like it. I think that was the price also. Its been awhile
Yes longer screws will work.With the longer screws it worked though? Looks like it's closer to 30 deg than 45. Will try it mounted left, as I shoot left. Should place the on/off at 12 posit. (Trs25) my favorite micro optic.
The 9mm in 16” barrel Should be at or over .357 magnum power range. Cant remember if that compared to 4” or 6” barrel. But the power is thereReading this am, looks like it's safe to shoot +p and +p+. In it. ( limited diet). Wonder what the ballistics are on that with the 16 inch barrel. I'd imagine +1400 or so.