What gun stuff did you do today?

[Dan1612]

Nice setup barebones! Looking forward to seeing it in action next Saturday.

Indeed

 

[barebones1]

Indeed

Thanks guys, should be a half min rifle.

Build sheet

Jp ultramatch 18 med / rifle lenth gas
Jp adjustable gass block and tube
Jp low mass bcg / firing pin
Jp bolt is matched by jp to barrel
Jp heat sinc barrel heat dissipater
Jp silent spring
Gibbz side non reciprocating side charge upper
Mag tac. Magnesium ultra light lower
Tyrant designs pistol grip
Odin works O2 light weight hand guard
Geissele Hi-Speed National Match Trigger set at 2 lb
Burris 1 x 8 x 24 34mm xtr ffp
Werne one piece 34mm
Magpul str stock
Jp comp 2 and jp recoil eliminator
Strike industries lower parts kit red take
Down pins and buffer tube
No charging handle ,forward assist or dust cover used
With the gibbz side charge
odin works mag release
magpul bad forward assist

 

[TennJeep1618]

new 2 gun rifle complete. still going to change out for-grip to the Odin works 15.5 . 12.5 on rifle now.
JP barrel break-in SundayView attachment 55927.

Are you going to get the red and black Odin rail like I had?

Sent from my SM-G920V using Tapatalk

 

[barebones1]

that is a sweet looking rifle ! This started out as a barrel swap. I was getting inconsistent groups with my main rifle. 1 1/2 and than the next string it would shoot 1/2 min. I knew it was not me? So I ordered a new barrel from jp. while it was shipping, found the problem in rifle #1. ( screw for bi-pod was pushing on gas block) when I loaded up on the bi-pod, gas was escaping and the barrel was being pushed on. moved bipod down and rifle returned to consistent 1/2. didn't want to send barrel back or remove a good working barrel from the gun. So......... I built a whole new gun. with the look and feel of the original. Red accessories are my uspsa color, so........ original rifle below

 

[TennJeep1618]

I think I need to adjust my expander die.

Sent from my SM-G920V using Tapatalk

 

[bohica793]

I think I need to adjust my expander die.

Sent from my SM-G920V using Tapatalk

Maybe just a tad.....

Put 200 rounds through my new G34 MOS I picked up yesterday. The sights will have to be replaced as I cannot see the stock white Glock sights with my poor vision, but otherwise everything else is great.

 

[TennJeep1618]

I swapped the Dillon expander for the MBF expander and wasn't sure how much I needed to adjust it. Quite a bit, apparently.

Sent from my SM-G920V using Tapatalk

 

[bohica793]

I swapped the Dillon expander for the MBF expander and wasn't sure how much I needed to adjust it. Quite a bit, apparently.

Sent from my SM-G920V using Tapatalk

Looks about right for seating that 230 grain ball ammo........

 

[TennJeep1618]

Yesterday I loaded 10 rounds each of 5 different .40 loads using Titegroup and 180gr Blue Bullets. I'll chrono them once I get the Edge back from the gunsmith.

After I loaded that test ammo on the turret press, I setup the .40 Mr. Bullet Feeder on my 1050. I got really lucky on the adjustment. I just pulled a couple shims out and moved the nose guide slightly, and it has run perfectly.

After that, I sorted a bunch of brass that I've accumulated over the last several months. I also tumbled a bunch of 40 brass over the course of the day.

 

[barebones1]

Range report. Jp barrel / drive line ,shot as advertised. Shot first 10 rounds setting scope and Gass block. Followed the Jp barrel recommend barrel breakin. J,b bore paste , clean shoot twenty. Repeat. Here are the groups shooting cheapest I could find crappie ammo. pictures won't load on my phone . I'll have to wait till I get back to the office . gun shot half a minute from the first round , recoil with almost non-existent . Back-to-back 5 round groups, covering a penny, while breaking the Barrel in. my 22 caliber M&P AR has more recoil . They claim the barrels shoot better after the first 200 rounds. Really ? Current round count 50. Complely exceeded my expectations. I will post pictures later. Going to stretch her legs out tomorrow at core.

Sent from my SCH-I545 using Tapatalk

 

[FrankT]

Testing my new gun rest/maintenance/sighting in/whatever else quadpod PS..Pic with all the racks is not mine, just thought it was cool

 

[FrankT]

Working on a beta clipon night vision unit, works well so far

Really need to get this out at night

 

[barebones1]

sweet frank. I used that super light lower in my new build. thanks again

 

[Jagerslayer]

sweet frank. I used that super light lower in my new build. thanks again

From one Frank to another WOW. I LIKEY. Do you a part # on the rack

Sent from my SM-G900V using Tapatalk

 

[Gas Port]

It feels like a semi-wadcutter night. I keep a 1911 barrel that I blew up close by to remind me to slow down. Everything goes in the headspace gauge and gets weighed.

 

[kendive]

Had a good morning shooting at land today. It's HOT so picked up this nice fan from Lowes. Make a big difference.

Loaded up some .308 220 Gr Sierra Rd Nose subs to shoot at 200 yards. Load data (9gr of 700x Mag Primer) I get very good results with the Rem 700 and the YHM Ti-QD Suppressor. I can hit the center of a 12" steel target every time at 200 yards dialing the SWFA scope 118 1/4" clicks up. This scope is sighting in dead on at 200 yards with full .308 150 gr bullets (Freedom Munitions stuff) Just what I had at the time.

Friend of mine brought his Rem 700 .308 (All Black)

Some Pics...

 

[barebones1]

9 of 10 on charlie7. 5 for5, 3.5 inch group on charlie 5 . after jogging up from lower pistol bays........great results.

 

[JWlineman]

While transferring some AE XM193 from stripper clips into a loose can for a match tomorrow, a single round fell outside the box and onto the back side where I didn't notice it. I loaded the small ammo box into my range bag and moved onto other things. A few minutes later I noticed the round sitting on the table, grabbed it and was about to put it with the other rounds when, for no real reason, I looked the round over and saw this...
Now I remember looking at primers and cases as I unloaded the rounds but didn't inspect every round. Just a reminder fellas, never hurts to slow down and look.
*For reference this came out of an American Eagle XM193J 30rd clipper strip box. .

Sent from my SM-N910V using Tapatalk

 

[Dan1612]

It'd shoot fine.


Sent from my iPhone using Tapatalk

 

[molldog06]

Went to the range with my dad this morning so he could shoot his new pistol he bought last month. Had a good time trying out his new gun and shooting my same old ones.


Sent from my iPhone using Tapatalk